Cleaning Of The Paper Dust Remover Assy; Removal Of The Synchronizing Roller Gear And Synchronizing Roller Bushing - Minolta Di200 Service Manual

FrameMaker Ver.5.5E(PC) Di200/Di251/Di351 DIS/REASSEMBLY, ADJUSTMENT
01.02.09
(3)

Cleaning of the Paper Dust Remover Assy

4011D011AA
(4)

Removal of the Synchronizing Roller Gear and Synchronizing Roller Bushing

4011D009AA
4011D012AA
4011D013AA
Ground Plate
Bushings
4011D014AB
1. Remove the Paper Dust Remover Assy.
2. Using a brush, whisk dust and dirt off the Paper
Dust Remover Assy.
1. Open the Side Cover.
2. Snap off two retaining rings E type and the upper
and lower Synchronizing Roller gears.
3. Remove one screw and the ground plate.
NOTE
• When reinstalling the ground plate, make sure
that the ground plate is in contact with the side
faces of the bushings.
D-11