Memory Full - Minolta DEClaser 2200 Service Manual

Table 3–3 (Cont.): Functional Messages
Number
Message

23 MEMORY FULL

24 FULL PAINT REJ
25 VECTOR REJ
26 MEMORY FULL
27–39
Description and Action
An overflow occurred while the host was downline loading user
defined character patterns to the printer.
Press , then
Error Skip On Line
the data that caused the error.
If this error occurs too frequently, the customer can increase
memory by installing an optional RAM expansion.
Insufficient memory space to use full paint mode. The customer
can increase memory space by installing an optional RAM
expansion.
Press , then
Error Skip On Line
mode.
Vector graphics commands from the host system cannot be used
because the printer is not in full paint mode. You have two possible
actions:
• Press , then
Error Skip On Line
vector graphics commands are treated as text and printed.
• Stop sending data from the host, select the paint = full value
from the initial setup menu, then send the data from the host
again.
NOTE: Vector graphics commands cause the printer
to fill in closed areas of circles, ellipses, and other
shapes.
The work memory used by the video control board has overflowed
and the current operation cannot be done. If this error occurs
too frequently, the customer can increase memory by installing an
optional RAM expansion.
Press , then
Error Skip On Line
host. The offending operation is ignored.
Not used.
DEClaser 2200 Troubleshooting
to continue receiving data and ignore
to continue printing in partial paint
to continue printing. Subsequent
to continue receiving data from the
3–17