Adding Devices To The Cisco Callmanager Database - Cisco IP Communicator Administration Manual

Adding Devices to the Cisco CallManager Database

Adding Devices to the Cisco CallManager Database
Table 2-3 An overview of options for adding devices to Cisco CallManager
Method for Adding
Devices
Auto-registration
Auto-registration with
TAPS
Using the
Cisco CallManager
Administration
Using BAT
Cisco IP Communicator Administration Guide for Cisco CallManager
2-10
Before installing the Cisco IP Communicator application, you must decide how
you want to add devices to the Cisco CallManager database.
Choose one of the methods described in the sections below:
Adding Devices with Auto-Registration, page 2-11
•
Adding Devices with Auto-Registration and TAPS, page 2-11
•
Adding Devices with Cisco CallManager Administration, page 2-12
•
• Adding Devices with BAT, page 2-13
Table 2-3 provides an overview of your options for adding devices to the
Cisco CallManager database. These options are described in detail in the topics
listed above.
Requires MAC
Address? Notes
No Results in automatic assignment of directory numbers.
No Requires auto-registration and the Bulk Administration
Tool (BAT); updates information in both the
Cisco IP Communicator application and in the
Cisco CallManager Administration.
Yes Requires devices to be added individually; you must add
the device to Cisco CallManager before installing the
application on the client PC.
Yes Allows for bulk registration of devices; you must add the
device to Cisco CallManager before installing the
application on the client PC.
Chapter 2 Preparing to Deploy Cisco IP Communicator
OL-4698-01