Adding A Server Group - Cisco PIX 520 - PIX Firewall 520 Online Help Manual

Accounting Port—Enter the port to be used for accounting information.
Apply to PIX—Applies changes you have made to the PIX Firewall.
Reset—Discards any changes without applying them.

Adding a Server Group

Follow these steps to add a server group:
1. In the AAA Server Groups panel, click Add. The Add AAA Server Group dialog box appears.
2. Enter the desired server group name in the Server Group box and click
3. Click OK to create the server group.
4. Click Apply to PIX.
Deleting a Server Group
Follow these steps to delete a server group:
1. In the AAA Server Groups panel, select the server group you want to delete in the AAA Server Group
table.
2. Click Delete. The group is deleted.
3. Click Apply to PIX.
Resetting to Last Applied Settings
Reset—Discards changes and reverts the panel to the information displayed when it was opened or the last time
Refresh was clicked while open.
Copyright © 2001 Cisco Systems, Inc.
TACACS+ or RADIUS.