Table of Contents
Advertisement
D E L I V E R Y I N S P E C T I O N A N D A C C E P T A N C E / S H I P P I N G A N D S T O R A G E
—
3. Delivery inspection and acceptance
The following precautions must be taken during
contactor handling：
• Keep the contactor in the upright position.
• Make sure that the load is balanced on the truck
or on the transport plate/pallet
• Place protective material between the contactor
and the truck to avoid any damage or scratches
• Fix the contactor onto the truck or the transport
plate/pallet to prevent it moving or overturning
• Avoid excessive speed, sudden starts and stops
or sharp changes in direction during contactor
handling
• Only lift the contactor enough to avoid any
obstacles on the floor
• Take care to avoid any impacts with structures,
—
Fig 3a
—
4. Shipping and storage
Place a minimum of one standard packet of
desiccant bags inside the packing. Replace the
bags approximately every 6 months.
If the original packing no longer be available and
immediate installation is not possible, store in a
covered, well-ventilated, dry, dust-free, non-corrosive
other apparatus or with personnel when handling
the contactor
• Never lift a contactor over an area where
personnel are present
• Ensure that no force is applied to insulating parts
or terminals of the contactor during handling of
the apparatus
3.1 Handling using a lifting or fork-lift truck. (Fig 3a)
3.2 Handling and lifting using a crane
• Insert the lifting plates
• Lift
• Remove the lifting plates after lifting operation
finish
ambient, with a dry atmosphere, away from any
flammable materials and at a temperature
between -15 °C and +40 °C.
In any case, avoid any accidental impacts or
positioning which stresses the structure of the
apparatus.
11
Hide quick links:
Advertisement
Table of Contents
