Nortel DMS-100 Series Replacement Procedures page 557

Replacing an NTBX02 card in an SMA2
At your current location
1 Proceed only if you have been directed to this card replacement procedure
from a step in a maintenance procedure, are using the procedure for verifying
or accepting cards, or have been directed to this procedure by your
maintenance support group.
2 Ensure you know the physical location of the faulty card.
If card location is
known
unknown
3 Perform the procedure "Locating a faulty card in an SMA2" and return to step
4
4 Obtain a replacement card. Ensure the replacement card has the same
product engineering code (PEC), including suffix, as the card being removed.
At the MAP terminal
5 Ensure the current MAP display is at the PM level and post the SMA2 by
typing
>MAPCI;MTC;PM;POST SMA2 sma2_no
and pressing the Enter key.
where
sma2_no
is the number of the SMA2 to be posted
Example of a MAP response
SMA2
PM
SMA2
SMA2 0 InSv
Unit0:
Unit1:
6 Go to the DCH level of the MAP display by typing
>DCH
and pressing the Enter key.
7 Post all DCH cards associated with the posted SMA2 by typing
>POST ALL
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
XPM card replacement procedures (continued)
SysB ManB Offl
3 0 1
0 0 0
Links_OOS:
Act InSv
Inact InSv
in an SMA2
Do
step 4
step 3
CBsy ISTb InSv
0 2 13
0 0 7
CSide 0, PSide 0
1-525
NTBX02
(continued)