Nortel DMS-100 Series Replacement Procedures page 926

1-894 XPM card replacement procedures (continued)
NTMX45
in an OPM HIE
9
10
11
12
At the MAP terminal
13
14
15
297-8021-547 Standard 14.02 May 2001
(continued)
Load the ESA processor by typing
>LOADPM
and pressing the Enter key.
If the load
message "loadfile not found in
directory" is received
load passes
load fails
Determine the type of device on which the PM load files are located.
If load files are located on
tape
IOC disk
SLM disk
Locate the tape that contains the PM load files.
Mount the tape on a magnetic tape drive.
Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
Demount the tape by typing
>DEMOUNT T tape_no
and pressing the Enter key.
where
Do
step 10
step 28
step 35
Do
step 11
step 17
step 22