Nortel DMS-100 Series Replacement Procedures page 844

Hide thumbs Also See for DMS-100 Series:

Table of Contents

1-812 XPM card replacement procedures (continued)

in an RSC LCM

Connector slot (16),

always unequipped

DBIC is installed

297-8021-547 Standard 14.02 May 2001

Close the line drawer.

Potential equipment damage

Make sure you insert the fuses in the correct location on the

fuse panel to prevent equipment damage.

Insert the fuses that you removed in step 11. Refer to the following ﬁgure.

Data cable trough