Nortel DMS-100 Series Replacement Procedures page 895

Connector slot (16),
always unequipped
when NTEX54
DBIC is installed
DBIC RJ-45
connector
DBIC
21 Close the line drawer.
22
Insert the fuses that you removed in step 11. Refer to the following figure.
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
XPM card replacement procedures (continued)
WARNING
Potential equipment damage
Make sure you insert the fuses in the correct location on the
fuse panel to prevent equipment damage.
in a STAR
Data cable trough
assembly
1-863
NTEX54
(continued)