Nortel DMS-100 Series Replacement Procedures page 221

At the MAP display
6 To test the line card just replaced, type
>DIAG
and press the Enter key.
If the DIAG
passes
fails
7 To return the line card to service, type
>RTS
and press the Enter key.
If the RTS
passes
fails
8 Send any faulty cards for repair according to local procedure.
9 Record the following items in office records:
• date the card was replaced
• serial number of the card
• indications that prompted replacement of the card
Go to step 11.
10 Get additional help replacing this card by contacting the personnel
responsible for a higher level of support.
11 You have correctly completed this procedure.
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
XPM card replacement procedures (continued)
Do
step 7
step 10
Do
step 8
step 10
NT6X99
in a STAR or RLD
1-189
(end)