Nortel DMS-100 Series Replacement Procedures page 428

1-396 XPM card replacement procedures (continued)
NTBX01
in an RSC-S (DS-1) Model B RCC2
12
At the MAP terminal
13
297-8021-547 Standard 14.02 May 2001
Seat and lock the card.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure the card is fully seated in the shelf.
b Close the locking levers.
After replacing the faulty card, load the inactive RCC2 unit by typing
>LOADPM UNIT rcc2_unit_no CC
and pressing the Enter key.
where
rcc2_unit_no
is the number of the RCC2 unit busied in step 8
(continued)