1-236 XPM card replacement procedures (continued)
NT7X05
in an SMS
(continued)
Replacing an NT7X05 card in an SMS
At your Current Location
1
2
At the MAP display
3
297-8021-547 Standard 14.02 May 2001
Proceed only if you were either directed to this card replacement procedure
from a step in a maintenance procedure, are using the procedure to verify or
accept cards, or were directed to this procedure by your maintenance support
group.
CAUTION
Loss of service
When replacing a card in the SMS ensure the unit where you
are replacing the card is INACTIVE and the mate unit is
ACTIVE.
Obtain a replacement card. Ensure the replacement card has the same
product equipment code (PEC) including suffix, as the card to be removed.
Access the PM level and post the SMS by typing
>MAPCI;MTC;PM;POST SMS sms_no
and pressing the Enter key.
where
sms_no
is the number of the SMS to be busied
Example of a MAP display: