Nortel DMS-100 Series Replacement Procedures page 677

8 Seat and lock the card.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure the card is fully seated in the shelf.
b Close the locking levers.
At the MAP terminal
9 Load the LCME unit by typing
>loadpm uNIT unit_no CC
and pressing the Enter key.
where
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
XPM card replacement procedures (continued)
in an RSC-S (DS-1) Model A LCME
1-645
NTBX35
(continued)