Nortel DMS-100 Series Replacement Procedures page 873

Catch
Line drawer
Thumb-latch
button
13 Disconnect the data cable from the RJ-45 connector on the DBIC. The RJ-45
connector is located at slot position 16 of the odd LSG (connector slot). Refer
to the following figure.
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
XPM card replacement procedures (continued)
in an RSC-S (DS-1) Model B LCM
1-841
NTEX54
(continued)