Nortel DMS-100 Series Replacement Procedures page 440

Hide thumbs Also See for DMS-100 Series:
Table of Contents

Advertisement

1-408 XPM card replacement procedures (continued)
NTBX01
in an RSC-S (PCM-30) Model B RCO2
Application
Use this procedure to replace an NTBX01 card in an RSC-S RCO2.
PEC
NTBX01
Note: NTBX01AC or NTBX01BA is required when the RC02 is configured with the
optional processor NTAX74AA instead of the NTMX77AA.
Common procedures
None
Action
The following flowchart is only a summary of the procedure. To replace the
card, use the instructions in the procedure that follows the flowchart.
297-8021-547 Standard 14.02 May 2001
Suffixes
Name
AB, AC,
ISDN Signaling Preprocessor
BA

Advertisement

Table of Contents
loading

Table of Contents