Nortel DMS-100 Series Replacement Procedures page 884

1-852 XPM card replacement procedures (continued)
NTEX54
in a STAR
(continued)
Summary of replacing an NTEX54 in a STAR
Busy the DBIC
at the xEMS
Post the STAR
at the MAP
Busy the
logical drawer
Remove power
from the
drawer
Replace the
card
Apply power to
the drawer
Test the logical
drawer
Return the
logical drawer
to service
297-8021-547 Standard 14.02 May 2001
This flowchart summarizes the
procedure.
Use the instructions in the
procedure that follows this
flowchart to perform the
procedure.
Update table
LCMDRINV with
new MAC address
Update the
Object Attributes
at the xEMS
Return the
DBIC to service
at the xEMS
End