1-76 XPM card replacement procedures (continued)
NT6X92
in an RSC RCC/RCC2
9
10
297-8021-547 Standard 14.02 May 2001
(continued)
c
Ensure the replacement card has the same PEC, including suffix, as the
card you just removed.
Open the locking levers on the replacement card.
a
Align the card with the slots in the shelf and gently slide the card into the
shelf.
Seat and lock the card.
a
Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure the card is fully seated in the shelf.
b
Close the locking levers.