Nortel DMS-100 Series Replacement Procedures page 196

Hide thumbs Also See for DMS-100 Series:

Table of Contents

1-164 XPM card replacement procedures (continued)

in an RSC LCM

Replacing an NT6X99 in an LCM

At the MAP terminal

297-8021-547 Standard 14.02 May 2001

Obtain a replacement card.

Ensure that the replacement card has the same product equipment code

(PEC), including sufﬁx, as the card to be removed.

Access the line test position (LTP) level of the MAP display and post the line

associated with the card to be replaced by typing

>MAPCI;MTC;LNS;LTP;POST L site lcm_no lsg_no ckt_no

and pressing the Enter key.

is the name of the site where the RSC LCM is located

is the number of the RSC LCM with the faulty card

is the number of the line subgroup with the faulty card

is the number of the circuit associated with the faulty card

Example of a MAP display:

LCC PTY RNG....LEN.. ...

CKT TYPE FL REM1 00 0 03 03

STA F S LTA TE RESULT