Nortel DMS-100 Series Replacement Procedures page 631

At the MAP terminal
9 Load the LCME unit by typing
>loadpm unit unit_no CC
and pressing the Enter key.
where
unit_no
is the number of the LCME unit busied in step 4
10 Use the following information to determine where to proceed.
If load
passed
failed
11 Use the following information to determine where to proceed.
If you entered this procedure
from
alarm clearing procedures
other
12 Return the LCME unit to service by typing
>RTS UNIT lcme_unit_no
and pressing the Enter key.
where
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
XPM card replacement procedures (continued)
in an RSC LCME
Do
step 11
step 17
Do
step 16
step 12
1-599
NTBX34
(continued)