Ntmx72 In An Rsc Rcc2 - Nortel DMS-100 Series Replacement Procedures

1-958 XPM card replacement procedures (continued)
NTMX72
in an RSC RCC2
Summary of card replacement procedure for an NTMX72 card in an RSC RCC2
Locate faulty
card
Verify card is
from inactive
unit
Manually busy
inactive unit
Power down
the unit
Remove and
replace faulty
card
Restore power
Load PM
RTS inactive
unit
297-8021-547 Standard 14.02 May 2001
(continued)
Y
RTS
End of
passed?
procedure
N
Contact next
level of support
This flowchart summarizes the
procedure.
Use the instructions in the
procedure that follows this
flowchart to perform the
procedure.