Nt7X05 In An Rsc Rcc/Rcc2 - Nortel DMS-100 Series Replacement Procedures

1-190 XPM card replacement procedures (continued)
NT7X05
in an RSC RCC/RCC2
Application
Use this procedure to replace the following card in an RSC RCC.
Note: This procedure is used to replace a card in an RCC or an RCC2. In
this procedure the term RCC refers to both the RCC in an RSC frame,
NT6X10, and an RCC2 in an RSCE cabinet, NTMX89.
PEC
NT7X05
Common procedures
None
Action
The following flowchart is a summary of the procedure. To replace the card,
use the instructions in the procedure that follows the flowchart.
297-8021-547 Standard 14.02 May 2001
Suffixes Name
AA Peripheral/Remote Loader-16 (PRL)