Nortel DMS-100 Series Replacement Procedures page 806

1-774 XPM card replacement procedures (continued)
NTEX17
in a STAR
(continued)
Summary of replacing an NTEX17 in a STAR
Manually busy
the xLC at the
xEMS
Post the line
for the card
Manually busy
the line circuit
Replace the
card
Diagnose the
line circuit
Return the line
to service
Return the xLC
to service at
the xEMS
End
297-8021-547 Standard 14.02 May 2001
This flowchart summarizes the
procedure.
Use the instructions in the
procedure that follows this
flowchart to perform the
procedure.