Nortel DMS-100 Series Replacement Procedures page 446

1-414 XPM card replacement procedures (continued)
NTBX01
in an
12
At the MAP terminal
13
297-8021-547 Standard 14.02 May 2001
Seat and lock the card.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure the card is fully seated in the shelf.
b Close the locking levers.
After replacing the faulty card, load the inactive RCO2 unit by typing
>LOADPM UNIT rco2_unit_no CC
and pressing the Enter key.
where
rco2_unit_no
is the number of the RCO2 unit busied in step 8
RSC-S (PCM-30) Model B RCO2