Nortel DMS-100 Series Replacement Procedures page 934

1-902 XPM card replacement procedures (continued)
NTMX45
in an RLCM HIE
7
297-8021-547 Standard 14.02 May 2001
(continued)
b Open the locking levers on the damaged card and carefully pull the card
towards you until it clears the shelf.
c Make sure that the replacement card has the same PEC and suffix as the
card you just removed. Also make sure that all DIP switches on the
replacement card match settings of the card just removed.
Open the locking levers on the replacement card.
a Align the card with the slots in the shelf and carefully slide the card into
the shelf.