Nortel DMS-100 Series Replacement Procedures page 1033

If RTS
failed
20 Remove the sign from the active RCO2 unit.
21 Send any faulty cards for repair according to local procedure.
22 Record the date the card was replaced, the serial number of the card, and the
symptoms that prompted replacement of the card. Go to step 25.
23 Return to the procedure that directed you to this procedure. At the point
where a faulty card list was produced, identify the next faulty card on the list
and go to the appropriate card replacement procedure for that card in this
manual.
24 Obtain further assistance in replacing this card by contacting operating
company maintenance personnel.
25 You have successfully completed this procedure. Return to the maintenance
procedure that directed you to this card replacement procedure and continue
as directed.
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
XPM card replacement procedures (continued)
in an RSC-S (PCM-30) Model B RCO2
Do
step 24
1-1001
NTMX72
(end)