Nortel DMS-100 Series Replacement Procedures page 668

1-636 XPM card replacement procedures (continued)
NTBX35
in an RSC LCME
At the MAP terminal
9
10
11
297-8021-547 Standard 14.02 May 2001
(continued)
Load the LCME unit by typing
>loadpm uNIT unit_no CC
and pressing the Enter key.
where
unit_no
is the number of the LCME unit busied in step 4
If load
passed
failed
Use the following information to determine where to proceed.
If you entered this procedure
from
alarm clearing procedures
other
Return the LCME unit to service by typing
>RTS UNIT lcme_unit_no
and pressing the Enter key.
where
Do
step 10
step 15
Do
step 14
step 11