Nt6X92 In An Sms - Nortel DMS-100 Series Replacement Procedures

Hide thumbs Also See for DMS-100 Series:

Table of Contents

1-132 XPM card replacement procedures (continued)

Use this procedure to replace an NT6X92 card in an SMS.

Common procedures

The following ﬂowchart is only a summary of the procedure. To replace the

card, use the instructions in the step-action procedure that follows the

297-8021-547 Standard 14.02 May 2001

To ensure peak performance, do not install the UTR and GTR on the

same SMS. Presently, there is no way of knowing which receiver is

used to interpret tones. Some call processing tones may be degraded if

designed for use with a GTR.

Universal tone receiver (UTR)

Global tone receiver (GTR)