Nortel DMS-100 Series Replacement Procedures page 840

1-808 XPM card replacement procedures (continued)
NTEX54
in an RSC LCM
Connector slot (16),
always unequipped
when NTEX54
DBIC is installed
DBIC RJ-45
connector
DBIC
14
297-8021-547 Standard 14.02 May 2001
(continued)
DANGER
Do not hold the card by the levers only
If you hold a card by the locking levers only, the levers can
break. Pull the card half way out of the slot. Carefully grasp
the card from below for more support. Continue to remove
the card from the drawer. Make sure that you do not touch
any wires or internal parts on the card.
Data cable trough
assembly