Case IH AFS Pro 700 Software Operating Manual page 89

When the field is located, another message displays:
"Field [was] found. (Field name) is now active." The
"Grower," "Farm," and "Field" windows automatically
populate with the correct information for the field.
Press the "OK" button to clear the message and proceed
to task selection or creation.
If the vehicle is located between fields (outer boundaries)
when the search starts, a pop-up options window lists the
fields in proximity to the vehicle.
Press the desired field in the options window.
If the field cannot be located, a message displays: "A
field was not found at the current GPS position. Please
manually select [a] field."
This may occur if a boundary does not exist for the field
or if the field is not on the memory stick.
Press the "OK" button to clear the message. Select a field
manually.
3 - SETUP
3-7
16
RCIL11DSP199BBG
17
RCIL11DSP200BBG
18
RCIL11DSP202BBG