Table of Contents
Advertisement
"Current Layout"
"Default" is the default selection in the "Current Layout"
window (1). The default layout for all six "Run" screens,
the left-hand area (if applicable), and the "Summary Data"
screens (if applicable) cannot be changed. The windows
are dimmed to indicate their locked condition. The display
uses the default layout for all screens whenever "Default"
is selected in the "Current Layout" window.
NOTE: Each farming application provides default layouts.
The operator can restore the default layout by selecting
"Default" in the "Current Layout" window.
"Run 1" is the default selection in the "Run screen" window
(2), which indicates that this is the layout for the first "Run"
screen.
"2 x 6" is the default selection in the "Number of Windows"
window (3), which indicates that the "Run 1" screen is
organized in two columns with six rows.
"Run" screen layouts
"Run" screen layouts are saved to the vehicle type and are
not saved with the other operator preferences. The oper-
ator creates screen layouts for the vehicle in use. "Run"
screen layouts created for one vehicle type can be shared
with other vehicles of the same type, but cannot be ac-
cessed on another vehicle type, nor imported into another
vehicle type.
To change the layout of the "Run" screens, the operator
must create a new layout.
A new layout may include an operator's preferences for
all six "Run" screens, the left-hand area (if applicable),
and the two "Summary Data" screens (if applicable). A
maximum of 20 layouts may be created.
Press the "Current Layout" window to access the pop-up
options window.
2 - ICONS AND WINDOWS
2-39
3
RCIL11DSP140BBG
4
RCIL11DSP140BBG
Advertisement
Table of Contents
