Table of Contents
Advertisement
Working with an application in the Virtual Terminal (VT)
Whenever the display is powered ON and an ISOBUS im-
plement or tool is connected, the implement or tool au-
tomatically uploads its software components to the dis-
play. Two icons display in the status and warning icon
area while the components load.
The object pool icon displays
while an ISOBUS implement or
tool uploads its components to the
display.
The diskette icon displays when
the object pool from an ISOBUS
implement is saved to or loaded
from Non-Volatile Memory (NVM)
in the display.
Once the components are loaded, the applications are
ready for use.
From the "Home" screen, press the "VT" icon to access
the "Virtual Terminal" screens.
In this example, the operator has placed the "VT Imple-
ments 1x1" window in the left-hand area. The window
displays an icon for each connected ISOBUS device: the
CNH switch box, the aircart, and a flow monitoring mod-
ule.
The icon for the selected device is highlighted in green.
The soft keys on the right-hand side of the screen al-
low you to navigate within the application for the selected
ISOBUS device.
The "Virtual Terminal" application provides three ways for
an operator to change the active ISOBUS application:
• Press the icon for an ISOBUS device in the "VT Im-
plements 1x1" window (1) or the "VT Implements 1x2"
window
NOTE: Use the "VT Implements 1x2" window if you
have more than three applications loaded.
• Press the "Next Application" button (2) to cycle to the
application for the next ISOBUS device
• Press the "Application Grid Select" icon (3) to view and
choose from a grid of icons for all connected ISOBUS
devices
The text at the bottom of the "VT" screen (4) identifies the
active application.
6 - VIRTUAL TERMINAL (VT) OR UNIVERSAL TERMINAL (UT)
6-19
1
RCPH09DSP395BAG
2
RAIL14DSP1424BA
Advertisement
Table of Contents
