Case IH AFS Pro 700 Software Operating Manual page 283

Implement
Since each implement has a unique ID, only delete an
implement if you are sure that you have no future use
for the implement. Re-creating the same implement at
a later time results in a new implement with a different
ID, requiring more management effort with the desktop
software.
NOTE: Sequences and work conditions can be recorded
for a specific implement. When the implement for which a
sequence or work condition has been recorded is deleted,
you will no longer be able to access that sequence or work
condition.
Deleting implements requires:
• Selection of "Implement" in the "Data Type" window
• Selection of "All" or specific implements with the "Imple-
ment" window
This data type is unique to tractors
Operator
Since each operator has a unique ID, only delete an op-
erator if you are sure that you have no future use for the
operator. Re-creating the same operator at a later time re-
sults in a new operator with a different ID, requiring more
management effort with the desktop software.
Deleting operators requires:
• Selection of "Operator" in the "Data Type" window
• Selection of "All" or specific operators with the "Opera-
tor" window
Tag
Since each tag has a unique ID, only delete a tag if you are
sure that you have no future use for the tag. Re-creating
the same tag at a later time results in a new tag with a
different ID, requiring more management effort with the
desktop software.
NOTE: Deleting a tag does not affect the data with which
it is associated.
Deleting tags requires:
• Selection of "Tag" in the "Data Type" window
• Selection of "All" or specific tags with the "Tag" window
4 - OPERATION
4-23
36
RCIL11DSP346BBG
37
RCIL11DSP348BBG
38
RCIL11DSP350BBG