Case IH AFS Pro 700 Software Operating Manual page 207

Boundary-related windows
"Boundary Area"
Placement label: Boundary Area
The "Boundary Area" window reports the area of the outer
boundary that the vehicle is currently in minus the total
area of all interior boundaries contained within the same
outer boundary. The value is reported in hectares or
acres, depending on the units of measurement selected.
The window requires the "Precision Farming" application
and is only active when a GPS receiver is present and
functioning.
NOTE: This window is empty If the vehicle is not inside of
an outer boundary.
"Tot Bound Area" (Total Boundary Area)
Placement label: Tot Bound Area
The "Tot Bound Area" window reports the total area of
all outer boundaries for the current field minus the total
area of all inner boundaries contained in the field. The
value is reported in hectares or acres, depending on the
units of measurement selected. The window requires the
"Precision Farming" application and is only active when a
GPS receiver is present and functioning.
"Area, Total Field"
Placement label: Area, Total Field
The "Area, Total Field" window reports the total area for
all tasks for the current operation and instance.
"Area Remaining"
Placement label: Area Remaining
The "Area Remaining" window reports the difference be-
tween the areas reported by the "Tot Bound Area" and
"Area, Total Field" windows – that is, the workable area
within the outer boundary that has not yet been worked.
The window requires the "Precision Farming" application
and is only active when a GPS receiver is present and
functioning.
3 - SETUP
3-125
33
RCIL11DSP047BBG
34
RCIL11DSP048BBG
35
RCIL11DSP021BBG
36
RCIL11DSP049BBG