Table of Contents
Advertisement
When viewed on a work map, the open obstacle appears
as an amber line that follows the path of the vehicle. The
exact path that the vehicle travels is recorded as the ob-
stacle.
An open obstacle must also be completed by the operator.
To close the obstacle, press the "Stop" button at the logical
stopping point for the obstacle.
When viewed on a work map, the point obstacle appears
as an amber warning symbol at the marked location. The
vehicle can be working while obstacle recording takes
place. Coverage and work results may be recorded at
the same time.
The exact location of the vehicle at the GPS receiver is
recorded as the obstacle location. Since the point obsta-
cle type is intended for smaller obstacles, the GPS re-
ceiver must be carefully aligned to the obstacle for the
most effective result.
3 - SETUP
3-134
20
RCIL11DSP268BBG
21
RCIL11DSP269BBG
Advertisement
Table of Contents
