Table of Contents
Advertisement
"CAN Status" screen
Press the "CAN" icon in the navigation bar to display the
"CAN Status" screen. This screen reports the status and
source address for every controller on the Controller Area
Network (CAN) bus, including the vehicle controllers.
This example shows the GPS receiver and the NAV II nav-
igation controller used for autoguidance.
The current status for any controller can be one of five
states:
Status
online
The controller is functioning normally.
offline
The controller was detected, but is no
longer communicating.
not detected
The controller is not detected on the
CAN bus.
degraded
The controller is operating in a
degraded state.
disabled
The controller has disabled itself and is
reporting its disabled condition.
The vehicle determines whether the serial number, boot-
code, hardware, and software versions for the controller
are communicated to the display.
8 - DIAGNOSTICS
Meaning
8-3
1
RAIL12DSP0998BA
Advertisement
Table of Contents
