Table of Contents
Advertisement
Work condition
Work conditions are a special case:
• On tractors, a work condition is linked to the implement.
• On combines, a work condition is linked to the crop type.
When "Work Condition" is selected in the "Data Type" win-
dow, the "Crop Type" window or "Implement" window must
be populated before deletion can occur.
The default setting is "All" for all windows when multiple
crop types, implements or work conditions are present.
NOTE: Work conditions are always managed by the soft-
ware that created them. When the display is shared with
different vehicle types, only the work conditions that were
created by the active software can be deleted. Selecting
"All" only deletes work conditions that were created by the
active application.
To delete all work conditions from display memory and
the memory stick:
1. Select "Work Condition" in the "Data Type" window.
2. The "Crop Type" window or "Implement" window de-
faults to "All."
3. The "Work Condition" window for the crop type or im-
plement defaults to "All." Press the "Delete" button to
delete all work conditions for all crop types or imple-
ments.
4. Press the "Yes" or "No" button at the confirmation mes-
sage.
4 - OPERATION
4-15
16
RCIL11DSP321BBG
17
RCIL11DSP322BBG
Advertisement
Table of Contents
