Table of Contents
Advertisement
"Backlight"
Press the "Backlight" window to access the pop-up bar
graph window.
NOTE: Some vehicles support both a daytime and a night-
time setting for display brightness. Turn the headlights
OFF when selecting the daytime setting. Turn the head-
lights ON when selecting the nighttime setting.
Press anywhere on the bar graph to immediately adjust
the backlight to the new level.
OR
Press the right or left arrow button to increase or decrease
the backlight in 5 % increments.
The backlight of the display immediately reflects the new
setting as changes are made.
Press the "Enter" button to save the setting.
Press the "Close"
button to exit the window without
changing the current setting.
"Current Vehicle"
NOTE: Select the correct vehicle type!
Vehicle selection chooses the core application for the dis-
play: for example, "Large Tractors" or "Medium Tractors."
The selected vehicle type interacts with other applications
and determines setup and calibration requirements.
Each vehicle type has different "Run" screens, "Home"
screen icons, and menus. "Generic Tractor" and "Generic
Combine" applications are available so that the display
can operate on early Case IH vehicles that do not have full
Controller Area Network (CAN) bus systems, or, in some
cases, on non-Case IH equipment.
Press the "Current Vehicle" window to access the pop-up
options window.
2 - ICONS AND WINDOWS
2-29
12
RCIL11DSP118BBG
13
RCIL11DSP109BBG
Advertisement
Table of Contents
