Precision Farming" Application: Field Boundaries, Obstacles, And Marks; Introduction; Field Boundaries - Case IH AFS Pro 700 Software Operating Manual

3 - SETUP

"PRECISION FARMING" APPLICATION: FIELD BOUNDARIES, OBSTACLES, AND MARKS

Introduction

This chapter explains:
• How to create field boundaries
• The boundary warning behavior
• Windows that are directly related to field boundaries
• How to create field obstacles
• The obstacle warning behavior
• How to create field marks

Field boundaries

Field boundaries can be created with the display when:
• The "Precision Farming" application is present
• The vehicle is equipped with a GPS receiver
AND
• A memory stick is installed in the display
NOTE: Field boundaries can also be created with the
desktop software.
The "Rec Boundary" window (placement label: Boundary
Record) is not part of the default layout and must be added
to a "Run" screen. If required, create a new name in the
"Current Layout" window on the "Run Layout "screen and
add the "Rec Boundary" window to the "Run" screen of
1
RCIL11DSP051BBG
your choice (Home > Toolbox > Layout).
NOTE: The "Rec Boundary" window is not available on
the "Run Layout" screen when no memory stick is in-
stalled.
One field can contain multiple boundaries depending on
the swath patterns that are needed to work the field. All
boundaries are saved to the field. If a field is deleted on
the "Delete" screen (Home > Data Management > Delete),
all of the boundaries for the field are also deleted. Delete
individual boundaries using the "Map" screen (Home >
Data Management > Map).
3-111