Table of Contents
Advertisement
If a window is changed before an operator is selected,
a message displays: "In order to save display settings,
please select a valid operator."
Press the "OK" button to acknowledge and clear the mes-
sage if required.
"Operator"
Every operator must have a unique ID for reporting pur-
poses within the software. To share a common list of op-
erators with multiple vehicles, create the list on one vehi-
cle, and then transfer the list, via the memory stick, to the
other vehicles. This ensures that the operator uses the
same internal ID across all vehicles.
A maximum of 20 operators can be created.
NOTE: An operator can also be created with the desktop
software and then imported.
Press the "Operator" window to access the pop-up options
window.
If no operators have been created, the only option is "New"
to create a new operator.
If "New" is chosen, the alphanumeric keypad displays.
Use the keypad to create a name.
Press the "Enter" button on the keypad to save the name.
NOTE: Be consistent when entering operator names, par-
ticularly if the display is used on different vehicle types.
The software interprets the names "PETER," "Peter," and
"peter" as three different operators. Your ability to mea-
sure productivity or summarize production results may be
complicated if work tasks are linked to operators that are
named inconsistently.
2 - ICONS AND WINDOWS
2-32
4
RCIL11DSP531BBG
5
RCIL11DSP532BBG
6
RCIL11DSP535BBG
Advertisement
Table of Contents
