Case IH AFS Pro 700 Software Operating Manual page 194

Create a boundary
With the vehicle in an appropriate location in the field,
press the "Record" button to begin boundary creation.
NOTE: The software adds a safety margin to the width
of the implement (or header) for whenever the vehicle
passes close to a boundary: 1 m (3 ft) or 10 % of the
implement width (or header width), whichever is greater.
The warning behavior for a boundary is triggered based
on the implement width (or header width) plus the safety
margin.
The "Boundary Properties" window displays to prompt
the operator for boundary properties:
• Boundary name
• Recording edge
• Boundary type
• Boundary subtype (inner boundaries only)
• Impassable (inner boundaries only)
Press the "Boundary Name" window to access the al-
phanumeric keypad.
3 - SETUP
3-112
2
RCIL11DSP051BBG
3
RCIL11DSP052BBG
4
RCIL11DSP052BBG