Table of Contents
Advertisement
"Height Offset"
The height offset (z-axis) is the distance from the bottom
center of the GPS receiver to the ground. This value must
be a positive number.
NOTE: An accurate "Height Offset" value is critical for
good guidance performance. Tire size can affect this
value significantly, so always measure the offset for your
vehicle when you set up GPS for the first time or when
you change the tires on your vehicle.
NOTE: Position the vehicle on flat, level ground to mea-
sure height offset.
The GPS receiver may be mounted on top of the AgGPS®
radio module as shown. Measure the height offset from
the base of the GPS receiver, not the radio module.
Press the "Height Offset" window to access the numeric
keypad.
Use the keypad to enter the value in meters (feet).
Press the "Enter" button on the keypad to save the value.
Press the "Close"
button to exit the keypad without
changing the value.
3 - SETUP
3-41
14
RCIL11DSP310BBG
15
RCIL11DSP298BBG
16
RAIL14DSP1516BA
Advertisement
Table of Contents
