Table of Contents
Advertisement
A pop-up message displays: "This screen is used to as-
sign implement functions to ISOBUS compliant auxiliary
inputs. Begin by selecting an implement in the upper left
box. You can then manually assign functions to inputs or
use Learn Mode. To use Learn Mode press the LEARN
button, select a function row, then physically actuate the
switch or dial you want to assign to the function. Remem-
ber to press the SAVE button when all edits are complete!
The DELETE button can be used to delete all assign-
ments."
Press the "OK" button to dismiss the message.
Use the "Learn" button to teach the system which control
you wish to use for a function.
Press the "Learn" button to enter "Learn" mode.
NOTE: The "Learn" button is a latching button that high-
lights when "Learn" mode is active.
With "Learn" mode active, press the icon for the function
that you wish to map.
The row highlights in orange to indicate that the system is
ready to map the function to a control.
Actuate the control that you wish to use for the selected
function.
If the control is valid for the selected function, the icon
for the control displays in the third column. The "Input
Enabled" icon does not display because the new mapping
is not yet saved.
Select other rows to map additional functions as required.
6 - VIRTUAL TERMINAL (VT) OR UNIVERSAL TERMINAL (UT)
6-16
18
RAIL14DSP1383BA
19
RAIL14DSP1384BA
20
RAIL14DSP1385BA
Advertisement
Table of Contents
