Table of Contents
Advertisement
VT auxiliary controls: version 2 compatible (AUX-O)
Auxiliary control mapping for version two
compatible ISOBUS implements or tools is a
manual process.
The following example shows the mapping of the func-
tions of a front-end loader to the buttons on a joystick con-
trol in the cab.
If you wish to view additional information about the func-
tion mapping process, press the "Help" button.
A pop-up message displays: "Version 2 Aux Controls.
This screen is used to assign implement or tool functions
to ISOBUS compliant auxiliary inputs. First, select an im-
plement or tool in the upper left box. You can then man-
ually assign functions to inputs. For each function, se-
lect an input device (i.e. switch box/panel) and an auxil-
iary control (i.e. switch/dial). When finished, remember
to scroll back to the top page and press the SAVE button
to save your edits! The DELETE button can be used to
delete all assignments."
Press the "OK" button to dismiss the message.
Press the ISOBUS implement/tool selection window to ac-
cess the pop-up icon window.
The pop-up window displays icons for the ISOBUS imple-
ments or tools that are currently connected to the AFS Pro
700.
Press the icon for the implement or tool that you wish to
configure – a front-end loader in this example.
6 - VIRTUAL TERMINAL (VT) OR UNIVERSAL TERMINAL (UT)
6-11
4
RAIL14DSP1372BA
5
RAIL14DSP1373BA
6
RAIL14DSP1414BA
Advertisement
Table of Contents
