Table of Contents
Advertisement
"DGPS Convergence"
Placement label: DGPS Converging
The "DGPS Convergence" window offers a visual repre-
sentation of progress for HP/XP/G2 and standard RTX™
technologies. While the system is making complex cal-
culations to reduce the GPS position error, the bar graph
moves with the progress. The "Convergence Status" win-
dow on the "GPS Setup" screen determines whether the
"DGPS Convergence" window reports a percentage or a
value in meters (inches). The "DGPS Convergence" win-
dow is only present when HP/XP/G2 or standard RTK is
used.
Use the "Reset" button to restart the convergence process
when required. Resetting convergence is required when
the "GPS Receive Position Recall Failed" message ap-
pears or if the operator answers the "Has the vehicle been
moved" question incorrectly.
Reset is also required if the bar graph stops at a low per-
centage. Convergence is stopped if there is no progress
on the bar graph for 10 - 20 min.
The "Reset" button is only present when HP/XP/G2 or
RTX™ is used. This is the only control window on the
"GPS Status" screen.
3 - SETUP
3-88
12
RCIL11DSP205BBG
13
RAIL12DSP1408BA
14
RAIL14DSP1590BA
Advertisement
Table of Contents
