Table of Contents
Advertisement
Duplicate names are not permitted. If you attempt to save
a name that already exists, a message displays: "Dupli-
cate name exists. Enter another name."
The message occurs when the "Enter" button on the key-
pad is pressed.
Press the "OK" button to acknowledge and clear the mes-
sage.
Press the "Close"
button to exit the keypad without
changing the original name, or use the keypad to modify
or select a variation on the name to continue.
Operator preferences
Operator preferences can be changed at any time by
modifying selections on the "Operator Setup" screen.
The settings are immediately recorded for the selected
operator as the settings are changed. The settings are
used across all applications that are installed on the
display.
"Units"
Press the "Units" window to display the pop-up options
window for units of measurement. Available selections
are:
• "Metric"
• "USA"
• "Imperial"
Press your preference to change the setting.
Press the "Close"
button to exit without changing the
current setting.
"Grid Lines"
Grid lines are the vertical and horizontal lines that sepa-
rate the windows.
Press the "Grid Lines" window to access the pop-up op-
tions window.
Press "No" to turn grid lines OFF or press "Yes" to turn
grid lines ON.
Press the "Close"
button to exit without changing the
current setting.
2 - ICONS AND WINDOWS
2-34
10
RCIL11DSP536BBG
11
RCIL11DSP580BBG
12
RCIL11DSP581BBG
Advertisement
Table of Contents
