Case IH AFS Pro 700 Software Operating Manual page 236

Press the "Layer" button to access the "Map Layer" win-
dow.
Press the "Marks" window to display the pop-up options
window.
Press "On" to display field marks with the other active map
layers.
Press "Off" to hide the field marks.
NOTE: Field mark locations are saved to the memory stick
regardless of the setting in the "Marks" window. This set-
ting only determines whether the marked locations are
shown in the map windows.
Press the "OK" button to save the selection and close the
"Map Layer" window.
"Swaths"
The autoguidance swath pattern appears on the map,
when enabled, along with the other active map layers.
The map window shows the current swath (red line) and
the three swaths (blue lines) to the immediate left and right
of the current swath.
If present in the map view, the recorded swath appears in
olive green.
The start point (green circle) and stop point (red star) of
the recorded swath also appear.
3 - SETUP
3-154
27
RCIL11DSP241BBG
28
RCIL11DSP242BBG
29
RCIL11DSP279BBG