Table of Contents
Advertisement
"Filter List" screen (crop type filter)
The complete crop list is not required in most farming op-
erations. Use the "Filter" screen to deselect the crop types
that will not be used. Deselecting a crop type with this
screen removes the crop type across all software on the
display, reducing the risk of selecting an incorrect crop
type.
The filtered list of selected crops can be modified at any
time. Select or deselect crop types as your farming oper-
ations change.
On the "Home" screen, press the "Data Management"
icon to access the "Data Management" screens.
Press the "Filter" icon in the navigation bar to display the
"Filter" screen.
The crop list contains all available crop types for the vehi-
cle. Use this screen to limit the crop types that appear in
the "Crop Type" window to those used in your operation.
This list may be changed at any time without affecting any
recorded data.
NOTE: By default, all crop types are selected.
Press the "Filter Crop List" button to access the "Filter
Crop List" pop-up window.
The crops selected on this list populate the "Crop Type"
window on the "Profile Setup" screen or the "Run"
screens. If a crop is not selected on this list, it cannot be
selected in the "Crop Type" window.
NOTE: The crop selection list varies by vehicle type –
combines, tractors, etc.
Press the box
next to the crop name to select or de-
select it, depending on its current state. An "X" indicates
that the box is selected.
Press the "None" button to deselect all crops.
Press the "All" button to select all crops.
Press the arrows on the scroll bar to page down or up
through window entries.
When you are satisfied with the selected crops, press the
"Enter" button to save the selection.
4 - OPERATION
4-6
1
RCIL11DSP108BBG
2
RCIL11DSP303BBG
3
RCIL11DSP305BBG
Advertisement
Table of Contents
