Case IH AFS Pro 700 Software Operating Manual page 234

With "Pan" selected, the "Plus" and "Minus" buttons ap-
pear in the map window and have the same function as
they do in manual mode. In addition, the operator can
press a location on the map to pan away from the vehicle
to that location. The new pan location shifts to the center
of the map.
Press a location on the map to pan the map view to that
location.
The map pans to the new location.
"Boundary"
Field boundaries can be created with the display or with
the desktop software.
A boundary is represented by a line that displays along
with the other active map layers:
• Bold red line – outer boundary (vehicle is within the
boundary)
• Bold black line – outer boundary (vehicle is outside of
the boundary)
• Maroon line – inner boundary
NOTE: See 3-111 for information about field boundaries.
3 - SETUP
3-152
21
RCIL11DSP025BBG
22
RCIL11DSP026BBG
23
RCIL11DSP237BBG