Table of Contents
Advertisement
The "Obstacle Properties" window displays to prompt the
operator for obstacle properties:
• Obstacle name
• Recording edge
• Obstacle type
• Obstacle subtype
Press the "Obstacle Name" window to access the al-
phanumeric keypad.
The default obstacle name is "Obstacle XX" where "XX"
is a number that increments each time another obstacle
is created in the current field.
If desired, type a new name for the obstacle.
Press the "Enter" button to save the name.
Press the "Close" button to exit without saving.
3 - SETUP
3-129
5
RCIL11DSP060BBG
6
RCIL11DSP060BBG
7
RCIL11DSP061BBG
Advertisement
Table of Contents
