Case IH AFS Pro 700 Software Operating Manual page 141

When xFill™ mode is enabled, the "xFill Setup" window
displays.
Press the "Edit" button in the "xFill Setup" window to ac-
cess the "xFill Setup" pop-up window.
Use the "xFill Satellite Frequency" window and the "xFill
Baud Rate" window to select the correct satellite fre-
quency and baud rate for your region. Refer to the below
table:
Region
Western North 1557.8615 MHz
America
Central North 1557.8150 MHz
America
Eastern North 1557.8590 MHz
America
Canada 1539.8325 MHz
South/Central 1539.8325 MHz
America
Europe/Africa 1539.9525 MHz
Asia Pacific 1539.8325 MHz
Use the "xFill Datum Select" window to select the co-
ordinate system with which your base station was sur-
veyed. With the correct coordinate system selected, the
AFS 372 GNSS receiver translates your position and min-
imizes drift. If your base station was properly surveyed
within the last five years, the xFill™ error will typically be
less than 15 cm (6 in) over 20 min.
Press the "xFill Datum Select" window to access the
pop-up options window.
The available options are:
• "WGS84"
• "ITFR2008"
• "NAD83"
• "ETRS89"
• "GDA94"
Press the correct coordinate system.
Press the "OK" button to save the new values.
Satellite Baud rate
frequency
600 Bd
2400 Bd
600 Bd
600 Bd
600 Bd
600 Bd
600 Bd
3 - SETUP
3-59
32
RAIL14DSP1544BA
33
RAIL14DSP1543BA
34
RAIL14DSP1543BA